मुख्य सामग्री पर जाएँ
QuakeFYI
🇬🇧

United Kingdom

भूकंपीय क्षेत्र: Low Europe
कुल भूकंप
0
सबसे बड़ी तीव्रता
भूकंपीय क्षेत्र
Low

United Kingdom Europe में स्थित है और इसका Low भूकंपीय जोखिम वर्गीकरण है। देश के भूकंपीय इतिहास में कुल 0 भूकंप दर्ज किए गए हैं। 69281437 की जनसंख्या और 244376 km² के भूमि क्षेत्र के साथ, भूकंपीय घटनाओं का बुनियादी ढाँचे और सार्वजनिक सुरक्षा पर महत्वपूर्ण प्रभाव हो सकता है।

भूकंपीय अवलोकन

The United Kingdom experiences low seismicity, generated primarily by the reactivation of ancient Caledonian and Variscan basement [[fault]] structures that were formed during Paleozoic mountain-building episodes hundreds of millions of years ago. These fault systems — including the Highland Boundary Fault and Great Glen Fault in Scotland, the Malvern Line and Church Stretton Fault in England, and the Lleyn Peninsula faults in Wales — periodically release accumulated stress in small to moderate earthquakes. The country's largest instrumentally recorded onshore earthquakes have reached approximately [[magnitude]] 5.2–5.4: the 1931 Dogger Bank offshore earthquake (M 6.1, the UK's largest instrumentally recorded event) and the 1984 Llŷn Peninsula earthquake (ML 5.4) represent the upper end of the British seismic catalog.

Despite the modest magnitudes, British earthquakes have occasionally caused notable damage. The 1580 Dover Strait earthquake (M estimated 5.8, with [[epicenter]] offshore between England and France) caused deaths and damage in London and Canterbury. The 1884 Colchester earthquake (M 4.6) caused more damage in terms of chimneys and masonry than any British event in living memory at the time. The 2008 Market Rasen earthquake (ML 5.2) was felt across most of England and caused some structural damage. Offshore, the North Sea and Irish Sea host occasional events, including induced events near hydrocarbon extraction fields in the North Sea.

The UK also experienced controversy around hydraulic fracturing ("fracking") induced seismicity, with the Preese Hall well in Lancashire generating ML 2.3 and 1.5 events in 2011 that caused sufficient concern to halt operations and ultimately contributed to the UK government's moratorium on fracking. This debate highlighted the sensitivity of British society and regulators to any seismic activity associated with industrial operations, even at very low magnitudes.

Geologically, Britain sits in the stable far-western European foreland, far from any active plate boundary. The nearest active seismic source to the west is the Mid-Atlantic Ridge, over 2,000 km away. The tectonic stresses driving UK seismicity are a diffuse combination of far-field Alpine compression, gravitational spreading of the Atlantic passive margin, and residual postglacial stress changes from deglaciation. The British Geological Survey (BGS) operates the national seismic monitoring network (NSMN) and maintains a long historical earthquake catalog stretching back to the 12th century. Seismic design requirements under Eurocode 8 are applied at very low acceleration values for most of Britain, with slightly elevated values for the Rayleigh Graben zone and parts of Scotland.

हाल के भूकंप

तीव्रता स्थान समय
कोई हालिया भूकंप नहीं।

Earthquakes Near Major Cities in United Kingdom

अक्सर पूछे जाने वाले प्रश्न

United Kingdom has a low level of seismic activity. Large earthquakes are infrequent but not impossible. A total of 0 earthquakes have been recorded in United Kingdom's seismic history.

United Kingdom has had 0 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

United Kingdom is classified in the "Low" seismic zone, located in Europe. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

भूकंप के दौरान, गिरो, ढको, और पकड़ो। एक मजबूत डेस्क या मेज़ के नीचे जाएँ, अपने सिर और गर्दन की रक्षा करें, और कंपन बंद होने तक पकड़े रहें। खिड़कियों और भारी वस्तुओं से दूर जाएँ। भूकंप के बाद, चोटों की जाँच करें और पश्चात्कंपों के लिए तैयार रहें।

देश के भूकंप जोखिम का आकलन कई कारकों का उपयोग करके किया जाता है: विवर्तनिक प्लेट सीमाओं से निकटता, ऐतिहासिक भूकंपीयता (पिछली घटनाओं की आवृत्ति और तीव्रता), भूवैज्ञानिक स्थितियाँ, भूकंपीय क्षेत्रों में जनसंख्या घनत्व, और भवन निर्माण संहिता प्रवर्तन। QuakeFYI इन कारकों के आधार पर 0 (कोई जोखिम नहीं) से 4 (बहुत अधिक) तक भूकंपीय क्षेत्र निर्धारित करता है।

भूकंपीय क्षेत्र एक भौगोलिक क्षेत्र है जिसे भूकंप खतरे के स्तर के अनुसार वर्गीकृत किया जाता है। क्षेत्र 0 में नगण्य जोखिम है, क्षेत्र 1 में कम जोखिम है, क्षेत्र 2 में मध्यम जोखिम है, क्षेत्र 3 में उच्च जोखिम है, और क्षेत्र 4 में बहुत अधिक जोखिम है। ये क्षेत्र ऐतिहासिक भूकंप डेटा, विवर्तनिक सेटिंग और भूवैज्ञानिक स्थितियों द्वारा निर्धारित किए जाते हैं।

प्रशांत रिंग ऑफ फायर के साथ स्थित देश सबसे अधिक भूकंपों का अनुभव करते हैं। जापान, इंडोनेशिया, चिली, फिलीपींस और ईरान लगातार सबसे अधिक भूकंपीय गतिविधि दर्ज करते हैं। संयुक्त राज्य अमेरिका (विशेषकर अलास्का और कैलिफोर्निया), तुर्किये और मेक्सिको भी सबसे अधिक भूकंपीय रूप से सक्रिय देशों में हैं।

जनसंख्या घनत्व भूकंप जोखिम को बढ़ाता है क्योंकि अधिक लोग और बुनियादी ढाँचा संभावित क्षति के संपर्क में होता है। घनी आबादी वाले शहर में 7.0 तीव्रता का भूकंप हजारों हताहत हो सकता है, जबकि निर्जन क्षेत्र में वही घटना कोई नुकसान नहीं कर सकती। भवन निर्माण संहिता और आपातकालीन तैयारी आबादी वाले क्षेत्रों में जोखिम को काफी कम करती है।

भूकंपीय घनत्व किसी देश के भूमि क्षेत्र के सापेक्ष भूकंप गतिविधि की सांद्रता को मापता है, जो प्रति 1,000 वर्ग किलोमीटर भूकंपों के रूप में व्यक्त किया जाता है। उच्च भूकंपीय घनत्व प्रति इकाई क्षेत्र में बार-बार भूकंप गतिविधि को इंगित करता है, जो विभिन्न आकार के देशों के बीच भूकंपीय जोखिम की तुलना करने में मदद करता है।