انتقل إلى المحتوى الرئيسي
🇦🇲

Armenia

المنطقة الزلزالية: High Asia
إجمالي الزلازل
2
أكبر قوة
5,1
المنطقة الزلزالية
High

Armenia تقع في Asia ولها تصنيف مخاطر زلزالية High. تم تسجيل ما مجموعه 2 زلزالاً في التاريخ الزلزالي للبلد. بلغت قوة أكبر زلزال مسجّل في البلاد 5,1. مع عدد سكان يبلغ 3076200 ومساحة أرض 29743 كم²، يمكن أن يكون للأحداث الزلزالية آثار كبيرة على البنية التحتية والسلامة العامة.

نظرة عامة زلزالية

Armenia sits within the Lesser Caucasus mountain system, a zone of intense collision between the Arabian Plate pushing northward into Eurasia at roughly 25–30 millimetres per year. This convergence has built the high ranges of the South Caucasus and loaded the crust with the stress that drives Armenia's significant seismic hazard. The principal active [[fault]] systems include the Pambak-Sevan-Syunik Fault Zone, which runs northeast-southwest across the country, and the Garni Fault near Yerevan. Both systems are capable of generating damaging earthquakes of magnitude 6.5 and above. The fault geometry is complex, with a mix of thrust, strike-slip, and normal faulting reflecting the overall compressional but locally extensional tectonic regime.

The 1988 Spitak earthquake is the defining seismic catastrophe of modern Armenian history. On December 7 of that year, a magnitude 6.8 event on the Pambak-Sevan Fault caused the complete destruction of the city of Spitak and severe damage to Gyumri (then Leninakan), killing between 25,000 and 50,000 people. The disaster exposed the catastrophic vulnerability of Soviet-era precast concrete panel buildings, which pancaked almost without exception. The Leninakan District was essentially levelled. Earlier significant events include the 1840 Ararat earthquake (magnitude approximately 7.4) and repeated historical earthquakes along the Garni fault system. [[aftershock]] sequences following large events can last months and compound damage to already weakened structures.

The deeper geological context of Armenia involves the closure of the ancient Tethys Ocean and the subsequent collision of the Arabian and Eurasian continental masses. Armenia straddles the suture zone where these collisions occurred over the past 30–40 million years. Crustal shortening rates are high, and GPS measurements confirm that the Arabian Plate is converging with Eurasia at rates that make sustained seismic activity inevitable. Volcanic features in the Aragats massif and along the Syunik Plateau are related to the same tectonic processes, with magmatism driven partly by the complex stress field created by collision. The [[epicenter]] distribution of historical events traces the main fault zones clearly, showing particular concentration along the Pambak-Sevan belt. Seismic hazard maps show that virtually the entire country faces significant ground-shaking risk, with the highest hazard in the northwest.

الزلازل الأخيرة

القوة الموقع الوقت
لا توجد زلازل حديثة.

الأحداث التاريخية البارزة

Earthquakes Near Major Cities in Armenia

الأسئلة الشائعة

Armenia is located in a high seismic risk zone, meaning earthquakes are frequent and can be destructive. A total of 2 earthquakes have been recorded in Armenia's seismic history.

The largest recorded earthquake in Armenia had a magnitude of 5.1. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

Armenia has had 2 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

Armenia is classified in the "High" seismic zone, located in Asia. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

أثناء الزلزال، انبطح واحتمِ وتمسّك. اذهب تحت مكتب أو طاولة متينة، واحمِ رأسك ورقبتك، وتمسّك حتى يتوقف الاهتزاز. ابتعد عن النوافذ والأجسام الثقيلة. بعد الزلزال، تحقق من الإصابات وكن مستعداً للهزات الارتدادية.

تُقيَّم مخاطر الزلازل في أي دولة باستخدام عدة عوامل: القرب من حدود الصفائح التكتونية، والنشاط الزلزالي التاريخي (تواتر وقوة الأحداث السابقة)، والظروف الجيولوجية، والكثافة السكانية في المناطق الزلزالية، وتطبيق قوانين البناء. يصنّف QuakeFYI المناطق الزلزالية من 0 (لا خطر) إلى 4 (خطر مرتفع جداً) بناءً على هذه العوامل.

المنطقة الزلزالية هي منطقة جغرافية مصنّفة حسب مستوى خطر الزلازل. المنطقة 0 ذات خطر ضئيل، والمنطقة 1 ذات خطر منخفض، والمنطقة 2 ذات خطر متوسط، والمنطقة 3 ذات خطر مرتفع، والمنطقة 4 ذات خطر مرتفع جداً. تُحدَّد هذه المناطق بناءً على بيانات الزلازل التاريخية والبيئة التكتونية والظروف الجيولوجية.

تشهد الدول الواقعة على حلقة النار في المحيط الهادئ أكثر الزلازل. تسجّل اليابان وإندونيسيا وتشيلي والفلبين وإيران باستمرار أعلى نشاط زلزالي. كما تُعدّ الولايات المتحدة (خاصة ألاسكا وكاليفورنيا) وتركيا والمكسيك من بين أكثر الدول نشاطاً زلزالياً.

تضخّم الكثافة السكانية مخاطر الزلازل لأن المزيد من الناس والبنية التحتية يتعرضون لأضرار محتملة. يمكن أن يتسبب زلزال بقوة 7.0 في مدينة مكتظة بآلاف الضحايا، بينما قد لا يتسبب نفس الحدث في منطقة غير مأهولة بأي ضحايا. تقلل قوانين البناء والاستعداد للطوارئ المخاطر بشكل كبير في المناطق المأهولة.

تقيس الكثافة الزلزالية تركّز النشاط الزلزالي بالنسبة لمساحة أراضي الدولة، ويُعبَّر عنها بعدد الزلازل لكل 1,000 كيلومتر مربع. تشير الكثافة الزلزالية العالية إلى نشاط زلزالي متكرر لكل وحدة مساحة، مما يساعد في مقارنة المخاطر الزلزالية بين دول مختلفة الأحجام.

المقاييس الزلزالية

الكثافة الزلزالية
0,07
زلزال لكل 1,000 كم²
التعرض الزلزالي
0,65
زلزال لكل مليون شخص

النشاط الزلزالي القريب

الملخص السنوي

السلامة من الزلازل

Armenia في منطقة مخاطر زلزالية عالية. يُوصى بشدة بالاستعداد للزلازل.

  • انبطح، احتمِ، وتمسّك أثناء الاهتزاز
  • احتفظ بحقيبة إمدادات طوارئ تحتوي على ماء وطعام وإسعافات أولية
  • حدد أماكن آمنة في كل غرفة بعيداً عن النوافذ والأجسام الثقيلة
  • اعرف مسارات إخلاء التسونامي إذا كنت في منطقة ساحلية