انتقل إلى المحتوى الرئيسي
🇴🇲

Oman

المنطقة الزلزالية: Low Asia
إجمالي الزلازل
1
أكبر قوة
4,4
المنطقة الزلزالية
Low

Oman تقع في Asia ولها تصنيف مخاطر زلزالية Low. تم تسجيل ما مجموعه 1 زلزالاً في التاريخ الزلزالي للبلد. بلغت قوة أكبر زلزال مسجّل في البلاد 4,4. مع عدد سكان يبلغ 5343630 ومساحة أرض 309500 كم²، يمكن أن يكون للأحداث الزلزالية آثار كبيرة على البنية التحتية والسلامة العامة.

نظرة عامة زلزالية

Oman's seismicity arises from two distinct tectonic environments. The dominant source is the Makran [[subduction-zone]] offshore in the Gulf of Oman and Arabian Sea, where the oceanic floor of the Gulf of Oman is being subducted beneath Iran and Pakistan along the Makran accretionary prism. This subduction zone is capable of generating great earthquakes and large-scale [[tsunami]]s — the 1945 Makran earthquake (magnitude 8.1) generated a tsunami that killed approximately 4,000 people in Pakistan and Oman and was felt as far as Mumbai. Oman's Hajar Mountains in the north represent an obducted ophiolite — a fragment of ancient oceanic crust from the Tethys Ocean that was thrust onto the Arabian continent during the Late Cretaceous. Active [[fault]] systems within the Hajar Mountains and at the Oman coastline contribute additional seismic hazard.

The most significant modern earthquake directly affecting Oman was the June 2007 Ghubbet Hasees event (magnitude 5.6) near Muscat, which caused panic and minor damage. The 1945 Makran earthquake generated [[tsunami]] waves that struck the Muscat coast, and historical accounts describe wave damage in Oman's coastal cities. The Masirah Island area off the eastern coast of Oman is positioned close to the Owen Fracture Zone, a major oceanic transform fault that occasionally generates moderate to large earthquakes. Events on the Owen Fracture Zone have been felt in Oman and Oman's offshore areas. The mountainous northern Oman region around Muscat and the Hajar range shows evidence of active faulting that warrants careful attention in urban planning.

The tectonic setting of Oman is dominated by its position on the passive margin of the Arabian Plate, but with the active Makran convergent margin less than 200 kilometres north of the Musandam Peninsula. The Musandam Peninsula itself forms a salient that projects northward into the Strait of Hormuz, and its complex folded and faulted geology reflects the local stress concentration at this corner of the Arabian Plate. The Owen Fracture Zone to the east of Oman represents the transform fault connecting the Carlsberg Ridge to the Makran subduction zone, completing the active plate boundary circuit around the Arabian Plate. GPS measurements in Oman show the slow but systematic northward motion of the Arabian Plate, confirming ongoing convergence with the Iranian margin. [[seismic-wave]] attenuation across the stable Arabian Platform is relatively low, meaning that energy from major Makran events reaches Muscat and other Omani cities with significant amplitude.

الزلازل الأخيرة

القوة الموقع الوقت
لا توجد زلازل حديثة.

الأحداث التاريخية البارزة

Earthquakes Near Major Cities in Oman

الأسئلة الشائعة

Oman has a low level of seismic activity. Large earthquakes are infrequent but not impossible. A total of 1 earthquakes have been recorded in Oman's seismic history.

The largest recorded earthquake in Oman had a magnitude of 4.4. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

Oman has had 1 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

Oman is classified in the "Low" seismic zone, located in Asia. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

أثناء الزلزال، انبطح واحتمِ وتمسّك. اذهب تحت مكتب أو طاولة متينة، واحمِ رأسك ورقبتك، وتمسّك حتى يتوقف الاهتزاز. ابتعد عن النوافذ والأجسام الثقيلة. بعد الزلزال، تحقق من الإصابات وكن مستعداً للهزات الارتدادية.

تُقيَّم مخاطر الزلازل في أي دولة باستخدام عدة عوامل: القرب من حدود الصفائح التكتونية، والنشاط الزلزالي التاريخي (تواتر وقوة الأحداث السابقة)، والظروف الجيولوجية، والكثافة السكانية في المناطق الزلزالية، وتطبيق قوانين البناء. يصنّف QuakeFYI المناطق الزلزالية من 0 (لا خطر) إلى 4 (خطر مرتفع جداً) بناءً على هذه العوامل.

المنطقة الزلزالية هي منطقة جغرافية مصنّفة حسب مستوى خطر الزلازل. المنطقة 0 ذات خطر ضئيل، والمنطقة 1 ذات خطر منخفض، والمنطقة 2 ذات خطر متوسط، والمنطقة 3 ذات خطر مرتفع، والمنطقة 4 ذات خطر مرتفع جداً. تُحدَّد هذه المناطق بناءً على بيانات الزلازل التاريخية والبيئة التكتونية والظروف الجيولوجية.

تشهد الدول الواقعة على حلقة النار في المحيط الهادئ أكثر الزلازل. تسجّل اليابان وإندونيسيا وتشيلي والفلبين وإيران باستمرار أعلى نشاط زلزالي. كما تُعدّ الولايات المتحدة (خاصة ألاسكا وكاليفورنيا) وتركيا والمكسيك من بين أكثر الدول نشاطاً زلزالياً.

تضخّم الكثافة السكانية مخاطر الزلازل لأن المزيد من الناس والبنية التحتية يتعرضون لأضرار محتملة. يمكن أن يتسبب زلزال بقوة 7.0 في مدينة مكتظة بآلاف الضحايا، بينما قد لا يتسبب نفس الحدث في منطقة غير مأهولة بأي ضحايا. تقلل قوانين البناء والاستعداد للطوارئ المخاطر بشكل كبير في المناطق المأهولة.

تقيس الكثافة الزلزالية تركّز النشاط الزلزالي بالنسبة لمساحة أراضي الدولة، ويُعبَّر عنها بعدد الزلازل لكل 1,000 كيلومتر مربع. تشير الكثافة الزلزالية العالية إلى نشاط زلزالي متكرر لكل وحدة مساحة، مما يساعد في مقارنة المخاطر الزلزالية بين دول مختلفة الأحجام.

المقاييس الزلزالية

التعرض الزلزالي
0,19
زلزال لكل مليون شخص

النشاط الزلزالي القريب

الملخص السنوي