Zum Hauptinhalt springen
🇱🇧

Lebanon

Seismische Zone: Moderate Asia
Erdbeben gesamt
1
Größte Magnitude
4,3
Seismische Zone
Moderate

Lebanon liegt in Asia und hat eine seismische Risikoklassifizierung von Moderate. Insgesamt wurden 1 Erdbeben in der seismischen Geschichte des Landes verzeichnet. Das stärkste im Land registrierte Erdbeben erreichte eine Magnitude von 4,3. Mit einer Bevölkerung von 5.490.000 und einer Landesfläche von 10.452 km² können seismische Ereignisse erhebliche Auswirkungen auf Infrastruktur und öffentliche Sicherheit haben.

Seismische Übersicht

Lebanon is cut from north to south by the Yammouneh Fault, the northernmost segment of the Dead Sea Transform Fault system. This left-lateral strike-slip [[fault]] constitutes the plate boundary between the Arabian Plate to the east and the Sinai (African) microplate to the west, accommodating approximately 3–6 millimetres per year of relative motion. The fault passes through the Bekaa Valley, which is a classic pull-apart trough formed at a releasing bend in the transform system. The Mount Lebanon Range to the west and the Anti-Lebanon Range to the east form the topographic walls of this tectonic valley. The Roum Fault in southern Lebanon is a major splay of the main transform that has produced damaging historical earthquakes. Offshore, the Latakia Ridge fault system beneath the eastern Mediterranean represents additional seismic sources.

Lebanon's seismic history is rich with catastrophic events recorded across multiple millennia. The 551 AD Beirut-Tripoli earthquake, estimated at magnitude 7.5, destroyed much of the Lebanese coast and generated a [[tsunami]] that struck Alexandria and other Mediterranean ports. The famous ancient Roman law school at Beirut (Berytus) was destroyed and never rebuilt to its former glory after this event. The 1202 Syria-Lebanon earthquake (magnitude approximately 7.6) caused widespread destruction across the Levant. The 1759 earthquakes — two major events in October and November — devastated Safed, Damascus, Baalbek, and the Bekaa Valley, killing tens of thousands. Modern Lebanon has not experienced a major damaging earthquake, but the geological evidence and [[epicenter]] distribution confirm that the seismic cycle is ongoing and a future great earthquake is inevitable on the Yammouneh or Roum fault systems.

The tectonic context of Lebanon's seismicity involves the northward motion of Arabia relative to Africa, driving left-lateral shear along the Dead Sea Transform. The pull-apart geometry of the Bekaa Valley is expressed in its flat basin floor underlain by thick sediments that could amplify [[seismic-wave]] energy in future earthquakes. The thrust faulting that has uplifted the Mount Lebanon and Anti-Lebanon ranges is a secondary consequence of restraining bends along the transform system. The offshore faulting beneath the Mediterranean creates additional hazard for Lebanon's densely populated coast. Beirut, a city of approximately 2.2 million people, sits on a narrow coastal strip between the sea and the steeply rising Mount Lebanon range, with the Yammouneh Fault approximately 30 kilometres to the east — dangerously close given the expected magnitude of the next major event.

Aktuelle Erdbeben

Mag Ort Uhrzeit
Keine aktuellen Erdbeben.

Bemerkenswerte historische Ereignisse

Earthquakes Near Major Cities in Lebanon

Häufig gestellte Fragen

Lebanon has a moderate level of seismic activity. Significant earthquakes occur periodically. A total of 1 earthquakes have been recorded in Lebanon's seismic history.

The largest recorded earthquake in Lebanon had a magnitude of 4.3. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

Lebanon has had 1 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

Lebanon is classified in the "Moderate" seismic zone, located in Asia. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

Während eines Erdbebens: Drop, Cover und Hold On. Unter einen stabilen Schreibtisch oder Tisch kriechen, Kopf und Nacken schützen und festhalten, bis die Erschütterungen aufhören. Von Fenstern und schweren Gegenständen entfernen. Nach dem Erdbeben auf Verletzungen prüfen und auf Nachbeben vorbereitet sein.

Das Erdbebenrisiko eines Landes wird anhand mehrerer Faktoren bewertet: Nähe zu tektonischen Plattengrenzen, historische Seismizität (Häufigkeit und Magnitude vergangener Ereignisse), geologische Bedingungen, Bevölkerungsdichte in seismischen Zonen und Durchsetzung von Bauvorschriften. QuakeFYI ordnet seismische Zonen von 0 (kein Risiko) bis 4 (sehr hoch) basierend auf diesen Faktoren zu.

Eine seismische Zone ist ein geografisches Gebiet, das nach dem Grad der Erdbebengefährdung klassifiziert wird. Zone 0 hat vernachlässigbares Risiko, Zone 1 geringes Risiko, Zone 2 mittleres Risiko, Zone 3 hohes Risiko und Zone 4 sehr hohes Risiko. Diese Zonen werden durch historische Erdbebendaten, tektonische Gegebenheiten und geologische Bedingungen bestimmt.

Länder entlang des Pazifischen Feuerrings erleben die meisten Erdbeben. Japan, Indonesien, Chile, die Philippinen und der Iran verzeichnen durchgehend die höchste seismische Aktivität. Die Vereinigten Staaten (insbesondere Alaska und Kalifornien), die Türkei und Mexiko gehören ebenfalls zu den seismisch aktivsten Nationen.

Die Bevölkerungsdichte verstärkt das Erdbebenrisiko, da mehr Menschen und Infrastruktur potenziellen Schäden ausgesetzt sind. Ein Erdbeben der Magnitude 7,0 in einer dicht besiedelten Stadt kann Tausende von Opfern fordern, während dasselbe Ereignis in einem unbewohnten Gebiet keine verursachen kann. Bauvorschriften und Katastrophenvorsorge reduzieren das Risiko in besiedelten Gebieten erheblich.

Die seismische Dichte misst die Konzentration von Erdbebenaktivität im Verhältnis zur Landfläche eines Landes, ausgedrückt als Erdbeben pro 1.000 Quadratkilometer. Eine hohe seismische Dichte weist auf häufige Erdbebenaktivität pro Flächeneinheit hin und hilft, das seismische Risiko zwischen Ländern unterschiedlicher Größe zu vergleichen.

Seismische Kennzahlen

Seismische Dichte
0,1
Erdbeben pro 1.000 km²
Seismische Exposition
0,18
Erdbeben pro Million Einwohner

Seismische Aktivität in der Nähe

Jahresübersicht

Erdbebensicherheit

Lebanon liegt in einer Zone mit mäßigem Erdbebenrisiko. Grundlegende Erdbebenvorsorge ist ratsam.

  • Ducken, Schutz suchen und festhalten während der Erschütterung
  • Halten Sie ein Notfallset mit Wasser, Nahrung und Erste-Hilfe-Material bereit
  • Identifizieren Sie sichere Stellen in jedem Raum, fern von Fenstern und schweren Gegenständen
  • Kennen Sie die Tsunami-Evakuierungsrouten, wenn Sie sich in einem Küstengebiet befinden