Ir al contenido principal
🇪🇨

Ecuador

Zona Sísmica: High South America
Total de Terremotos
12
Mayor Magnitud
5,0
Zona Sísmica
High

Ecuador se encuentra en South America y tiene una clasificación de riesgo sísmico High. Se han registrado un total de 12 terremotos en la historia sísmica del país. El mayor terremoto registrado en el país alcanzó una magnitud de 5,0. Con una población de 18 103 660 y un área terrestre de 276 841 km², los eventos sísmicos pueden tener implicaciones significativas para la infraestructura y la seguridad pública.

Visión General Sísmica

Ecuador sits directly above the collision zone between the Nazca Plate and the South American Plate, facing the most energetic segment of the South American [[subduction-zone]] where convergence rates reach approximately 6.5 centimetres per year. The Ecuador Trench lies roughly 100 kilometres off the Pacific coast, and the locked interface between the two plates generates periodic great earthquakes and associated [[tsunami]]s that have shaped Ecuador's coastal history. The subducting Carnegie Ridge — a major aseismic volcanic ridge on the Nazca Plate formed by the Galápagos hotspot — is currently colliding with and partially subduc­ting beneath Ecuador, perturbing the [[subduction-zone]] geometry and potentially influencing both the rupture segmentation and the [[tsunami]] generation characteristics of future great earthquakes. Onshore, the Andean volcanic arc includes some of the most active volcanoes in South America: Cotopaxi (the world's highest active volcano at 5,897 metres), Tungurahua, Sangay, Reventador, and Pichincha all erupt periodically, generating volcano-tectonic earthquake swarms. The inter-Andean valley where Quito and Riobamba are located is bordered by active crustal faults that represent urban seismic hazards independent of the offshore [[subduction-zone]]. The Galápagos Islands to the west, on the Nazca Plate, sit above the Galápagos hotspot and experience volcanic seismicity distinct from the subduction-driven seismicity of mainland Ecuador.

Ecuador's recorded seismic history is dominated by the great 1906 earthquake — one of the largest of the twentieth century — and subsequent subduction events along the same interface. The 31 January 1906 Ecuador-Colombia earthquake (magnitude 8.5–8.8) generated a powerful [[tsunami]] that killed over 500–1,000 people along the coast and was recorded across the Pacific. Its rupture zone extended from Esmeraldas in Ecuador northward into Colombia. The 19 January 1958 earthquake (magnitude 7.8) struck the same northern Ecuador coast and generated a locally destructive [[tsunami]]. The 12 December 1979 Tumaco earthquake (magnitude 7.9) on the Colombia-Ecuador border caused 259 deaths and significant coastal damage. The 5 March 1987 Reventador earthquake (magnitude 7.1 and 6.9) struck the Amazonian foothills of northeastern Ecuador, triggering massive landslides that severed the Trans-Ecuadorian oil pipeline and caused economic losses estimated at over 1 billion dollars — a reminder that even moderate earthquakes in steep Andean terrain can have outsized economic consequences. The 16 April 2016 Pedernales earthquake (magnitude 7.8) struck the northern coast near the city of Pedernales, killing 676 people and destroying thousands of buildings; the [[epicenter]] was shallow and the shaking was intensified by coastal sediments, making it Ecuador's deadliest earthquake in recent decades.

Ecuador's tectonic framework reflects the same broad Andean subduction system that runs the length of western South America, but with distinctive complications from the Carnegie Ridge collision and the presence of the Galápagos microplate to the west. The Carnegie Ridge — a chain of elevated oceanic crust produced by the Galápagos hotspot as the Nazca Plate passed over it — is approximately 200 kilometres wide and stands 2 kilometres above the surrounding ocean floor; its partial subduction beneath Ecuador modifies the coupling of the [[subduction-zone]] interface and is associated with the historical concentration of large earthquakes in the northern Ecuador-southern Colombia segment. The inter-Andean valley (Sierra), the geological expression of a structural graben between the Western and Eastern Cordilleras, contains numerous active normal and reverse faults related to crustal deformation within the Andean wedge. Quito, Ecuador's capital, sits in the Sierra within reach of both the offshore [[subduction-zone]] and the Quito Fault System, which runs almost directly beneath the city. Paleoseismological trenching of the Quito Fault has revealed evidence of multiple large prehistoric earthquakes, suggesting a recurrence that makes future urban hazard in Quito a serious concern. [[aftershock]] sequences following major Ecuadorian earthquakes can last months; the 2016 Pedernales sequence included several M6+ events. Ecuador's Instituto Geofísico (IG-EPN) operates the national seismological and volcanic monitoring network.

Terremotos Recientes

Mag Ubicación Hora
4,4 136 km NW of Mosquera, Colombia 2 días, 11 horas atrás

Eventos Históricos Notables

Earthquakes Near Major Cities in Ecuador

Preguntas Frecuentes

Ecuador is located in a high seismic risk zone, meaning earthquakes are frequent and can be destructive. A total of 12 earthquakes have been recorded in Ecuador's seismic history.

The largest recorded earthquake in Ecuador had a magnitude of 5.0. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

Ecuador has had 12 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

Ecuador is classified in the "High" seismic zone, located in South America. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

Durante un terremoto, Agáchese, Cúbrase y Sujétese. Métase debajo de un escritorio o mesa resistente, proteja su cabeza y cuello, y sujétese hasta que el temblor se detenga. Aléjese de ventanas y objetos pesados. Después del terremoto, revise si hay heridos y prepárese para réplicas.

El riesgo sísmico de un país se evalúa utilizando varios factores: proximidad a los límites de placas tectónicas, sismicidad histórica (frecuencia y magnitud de eventos pasados), condiciones geológicas, densidad de población en zonas sísmicas y aplicación de códigos de construcción. QuakeFYI asigna zonas sísmicas de 0 (sin riesgo) a 4 (muy alto) basándose en estos factores.

Una zona sísmica es un área geográfica clasificada por el nivel de peligro sísmico. La Zona 0 tiene riesgo insignificante, la Zona 1 tiene riesgo bajo, la Zona 2 tiene riesgo moderado, la Zona 3 tiene riesgo alto y la Zona 4 tiene riesgo muy alto. Estas zonas se determinan por datos históricos de terremotos, contexto tectónico y condiciones geológicas.

Los países a lo largo del Cinturón de Fuego del Pacífico experimentan la mayor cantidad de terremotos. Japón, Indonesia, Chile, Filipinas e Irán registran consistentemente la mayor actividad sísmica. Estados Unidos (especialmente Alaska y California), Turquía y México también se encuentran entre las naciones más sísmicamente activas.

La densidad de población amplifica el riesgo sísmico porque más personas e infraestructura están expuestas a posibles daños. Un terremoto de magnitud 7,0 en una ciudad densamente poblada puede causar miles de víctimas, mientras que el mismo evento en un área deshabitada puede no causar ninguna. Los códigos de construcción y la preparación para emergencias reducen enormemente el riesgo en áreas pobladas.

La densidad sísmica mide la concentración de actividad sísmica en relación con el área terrestre de un país, expresada como terremotos por cada 1.000 kilómetros cuadrados. Una alta densidad sísmica indica actividad sísmica frecuente por unidad de área, lo que ayuda a comparar el riesgo sísmico entre países de diferentes tamaños.

Métricas Sísmicas

Densidad Sísmica
0,04
terremotos por 1.000 km²
Exposición Sísmica
0,66
terremotos por millón de personas

Placas Tectónicas

Fallas Geológicas

Actividad Sísmica Cercana

Resumen Anual

Seguridad ante terremotos

Ecuador se encuentra en una zona de alto riesgo sísmico. Se recomienda encarecidamente estar preparado para terremotos.

  • Agáchese, cúbrase y sujétese durante el temblor
  • Mantenga un kit de emergencia con agua, comida y primeros auxilios
  • Identifique lugares seguros en cada habitación, lejos de ventanas y objetos pesados
  • Conozca las rutas de evacuación por tsunami si se encuentra en una zona costera