मुख्य सामग्री पर जाएँ
QuakeFYI
🇦🇲

Armenia

भूकंपीय क्षेत्र: High Asia
कुल भूकंप
2
सबसे बड़ी तीव्रता
5.1
भूकंपीय क्षेत्र
High

Armenia Asia में स्थित है और इसका High भूकंपीय जोखिम वर्गीकरण है। देश के भूकंपीय इतिहास में कुल 2 भूकंप दर्ज किए गए हैं। देश में दर्ज सबसे बड़ा भूकंप 5.1 तीव्रता तक पहुँचा। 3076200 की जनसंख्या और 29743 km² के भूमि क्षेत्र के साथ, भूकंपीय घटनाओं का बुनियादी ढाँचे और सार्वजनिक सुरक्षा पर महत्वपूर्ण प्रभाव हो सकता है।

भूकंपीय अवलोकन

Armenia sits within the Lesser Caucasus mountain system, a zone of intense collision between the Arabian Plate pushing northward into Eurasia at roughly 25–30 millimetres per year. This convergence has built the high ranges of the South Caucasus and loaded the crust with the stress that drives Armenia's significant seismic hazard. The principal active [[fault]] systems include the Pambak-Sevan-Syunik Fault Zone, which runs northeast-southwest across the country, and the Garni Fault near Yerevan. Both systems are capable of generating damaging earthquakes of magnitude 6.5 and above. The fault geometry is complex, with a mix of thrust, strike-slip, and normal faulting reflecting the overall compressional but locally extensional tectonic regime.

The 1988 Spitak earthquake is the defining seismic catastrophe of modern Armenian history. On December 7 of that year, a magnitude 6.8 event on the Pambak-Sevan Fault caused the complete destruction of the city of Spitak and severe damage to Gyumri (then Leninakan), killing between 25,000 and 50,000 people. The disaster exposed the catastrophic vulnerability of Soviet-era precast concrete panel buildings, which pancaked almost without exception. The Leninakan District was essentially levelled. Earlier significant events include the 1840 Ararat earthquake (magnitude approximately 7.4) and repeated historical earthquakes along the Garni fault system. [[aftershock]] sequences following large events can last months and compound damage to already weakened structures.

The deeper geological context of Armenia involves the closure of the ancient Tethys Ocean and the subsequent collision of the Arabian and Eurasian continental masses. Armenia straddles the suture zone where these collisions occurred over the past 30–40 million years. Crustal shortening rates are high, and GPS measurements confirm that the Arabian Plate is converging with Eurasia at rates that make sustained seismic activity inevitable. Volcanic features in the Aragats massif and along the Syunik Plateau are related to the same tectonic processes, with magmatism driven partly by the complex stress field created by collision. The [[epicenter]] distribution of historical events traces the main fault zones clearly, showing particular concentration along the Pambak-Sevan belt. Seismic hazard maps show that virtually the entire country faces significant ground-shaking risk, with the highest hazard in the northwest.

हाल के भूकंप

तीव्रता स्थान समय
कोई हालिया भूकंप नहीं।

उल्लेखनीय ऐतिहासिक घटनाएं

Earthquakes Near Major Cities in Armenia

अक्सर पूछे जाने वाले प्रश्न

Armenia is located in a high seismic risk zone, meaning earthquakes are frequent and can be destructive. A total of 2 earthquakes have been recorded in Armenia's seismic history.

The largest recorded earthquake in Armenia had a magnitude of 5.1. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

Armenia has had 2 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

Armenia is classified in the "High" seismic zone, located in Asia. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

भूकंप के दौरान, गिरो, ढको, और पकड़ो। एक मजबूत डेस्क या मेज़ के नीचे जाएँ, अपने सिर और गर्दन की रक्षा करें, और कंपन बंद होने तक पकड़े रहें। खिड़कियों और भारी वस्तुओं से दूर जाएँ। भूकंप के बाद, चोटों की जाँच करें और पश्चात्कंपों के लिए तैयार रहें।

देश के भूकंप जोखिम का आकलन कई कारकों का उपयोग करके किया जाता है: विवर्तनिक प्लेट सीमाओं से निकटता, ऐतिहासिक भूकंपीयता (पिछली घटनाओं की आवृत्ति और तीव्रता), भूवैज्ञानिक स्थितियाँ, भूकंपीय क्षेत्रों में जनसंख्या घनत्व, और भवन निर्माण संहिता प्रवर्तन। QuakeFYI इन कारकों के आधार पर 0 (कोई जोखिम नहीं) से 4 (बहुत अधिक) तक भूकंपीय क्षेत्र निर्धारित करता है।

भूकंपीय क्षेत्र एक भौगोलिक क्षेत्र है जिसे भूकंप खतरे के स्तर के अनुसार वर्गीकृत किया जाता है। क्षेत्र 0 में नगण्य जोखिम है, क्षेत्र 1 में कम जोखिम है, क्षेत्र 2 में मध्यम जोखिम है, क्षेत्र 3 में उच्च जोखिम है, और क्षेत्र 4 में बहुत अधिक जोखिम है। ये क्षेत्र ऐतिहासिक भूकंप डेटा, विवर्तनिक सेटिंग और भूवैज्ञानिक स्थितियों द्वारा निर्धारित किए जाते हैं।

प्रशांत रिंग ऑफ फायर के साथ स्थित देश सबसे अधिक भूकंपों का अनुभव करते हैं। जापान, इंडोनेशिया, चिली, फिलीपींस और ईरान लगातार सबसे अधिक भूकंपीय गतिविधि दर्ज करते हैं। संयुक्त राज्य अमेरिका (विशेषकर अलास्का और कैलिफोर्निया), तुर्किये और मेक्सिको भी सबसे अधिक भूकंपीय रूप से सक्रिय देशों में हैं।

जनसंख्या घनत्व भूकंप जोखिम को बढ़ाता है क्योंकि अधिक लोग और बुनियादी ढाँचा संभावित क्षति के संपर्क में होता है। घनी आबादी वाले शहर में 7.0 तीव्रता का भूकंप हजारों हताहत हो सकता है, जबकि निर्जन क्षेत्र में वही घटना कोई नुकसान नहीं कर सकती। भवन निर्माण संहिता और आपातकालीन तैयारी आबादी वाले क्षेत्रों में जोखिम को काफी कम करती है।

भूकंपीय घनत्व किसी देश के भूमि क्षेत्र के सापेक्ष भूकंप गतिविधि की सांद्रता को मापता है, जो प्रति 1,000 वर्ग किलोमीटर भूकंपों के रूप में व्यक्त किया जाता है। उच्च भूकंपीय घनत्व प्रति इकाई क्षेत्र में बार-बार भूकंप गतिविधि को इंगित करता है, जो विभिन्न आकार के देशों के बीच भूकंपीय जोखिम की तुलना करने में मदद करता है।

भूकंपीय मेट्रिक्स

भूकंपीय घनत्व
0.07
प्रति 1,000 km² भूकंप
भूकंपीय जोखिम
0.65
प्रति दस लाख लोगों पर भूकंप

निकटवर्ती भूकंपीय गतिविधि

वार्षिक सारांश

भूकंप सुरक्षा

Armenia उच्च भूकंपीय जोखिम क्षेत्र में है। भूकंपों के लिए तैयार रहने की दृढ़ता से अनुशंसा की जाती है।

  • कंपन के दौरान गिरो, ढको, और पकड़ो
  • पानी, भोजन और प्राथमिक चिकित्सा के साथ एक आपातकालीन आपूर्ति किट रखें
  • प्रत्येक कमरे में खिड़कियों और भारी वस्तुओं से दूर सुरक्षित स्थानों की पहचान करें
  • यदि तटीय क्षेत्र में हैं तो सुनामी निकासी मार्ग जानें