मुख्य सामग्री पर जाएँ
QuakeFYI
🇵🇪

Peru

भूकंपीय क्षेत्र: High South America
कुल भूकंप
19
सबसे बड़ी तीव्रता
6.0
भूकंपीय क्षेत्र
High

Peru South America में स्थित है और इसका High भूकंपीय जोखिम वर्गीकरण है। देश के भूकंपीय इतिहास में कुल 19 भूकंप दर्ज किए गए हैं। देश में दर्ज सबसे बड़ा भूकंप 6.0 तीव्रता तक पहुँचा। 34350244 की जनसंख्या और 1285216 km² के भूमि क्षेत्र के साथ, भूकंपीय घटनाओं का बुनियादी ढाँचे और सार्वजनिक सुरक्षा पर महत्वपूर्ण प्रभाव हो सकता है।

भूकंपीय अवलोकन

Peru faces some of the Western Hemisphere's greatest seismic hazard from the [[subduction-zone]] of the Nazca Plate beneath the South American Plate along the Peru-Chile Trench, which lies 100 to 150 kilometres off the Pacific coast. Convergence rates of approximately 6 to 7 centimetres per year have accumulated elastic strain along the Peruvian [[subduction-zone]] for centuries, producing periodic great earthquakes with associated [[tsunami]]s that have shaped the country's coastal geography and history. Peru's seismic complexity is increased by the variation in subduction geometry: beneath central Peru, the Nazca Plate flattens into near-horizontal geometry (flat-slab subduction) as it underthrusts the South American Plate at shallow angles, carrying seismicity and deformation far into the Andean Cordillera and reducing surface volcanism over that stretch. Beneath southern Peru and northern Chile, subduction returns to steeper angles, supporting the active volcanic arc of the southern Andes. The subduction interface is variably locked along its length: some segments last ruptured centuries ago and are considered mature seismic gaps with high hazard. Inland, the Andes host thrust faults, reverse faults, and strike-slip faults that generate crustal earthquakes independent of the megathrust system, and the Lima metropolitan area — home to over 10 million people — is situated between the locked [[subduction-zone]] interface offshore and active crustal faults onshore.

Peru's earthquake history is among the most destructive in South America. The 13 August 1868 southern Peru earthquake (magnitude 8.5–9.0) generated a [[tsunami]] that devastated Arica and was felt along the entire Pacific coast of South America; estimates of deaths range into the tens of thousands. The 31 May 1970 Ancash earthquake (magnitude 7.9) triggered the Huascarán debris avalanche — a mass of ice, rock, and glacial till that descended 3,500 metres in approximately three minutes and buried the cities of Yungay and Ranrahirca, killing approximately 70,000 people — making it one of the deadliest landslide disasters in recorded history. The 1970 earthquake killed a total of 70,000 to 80,000 people, making it the most deadly earthquake in the history of South America and one of the deadliest of the twentieth century worldwide. The 23 June 2001 southern Peru earthquake (magnitude 8.4) generated a [[tsunami]] that reached heights of 4–7 metres in southern Peru and caused damage to coastal communities. The 15 August 2007 Pisco earthquake (magnitude 8.0) killed 519 people, destroyed the colonial town of Pisco, and damaged the historic city of Ica; the [[epicenter]] was offshore and the [[tsunami]] reached nearby coastlines within minutes of the event. The Lima metropolitan area has not experienced a great interface earthquake since at least the early 19th century (the 1746 Lima earthquake, estimated magnitude 8.6, destroyed the city and generated a tsunami) and the accumulated strain on the Lima segment of the [[subduction-zone]] is a subject of intense scientific attention.

The geological architecture of Peru reflects the long-term consequences of Andean subduction and crustal thickening. The Andes form the world's highest tropical mountain range, with multiple summits exceeding 6,000 metres and the Altiplano plateau at an average elevation of 3,800 metres, both products of crustal shortening driven by Nazca subduction. The coastal desert — one of the driest on Earth — forms in the rain shadow of the Andes created by the same orographic processes. The subducted Nazca Plate carries seamount chains and the Nazca Ridge, whose collision with the [[subduction-zone]] perturbs seismic coupling locally. [[aftershock]] sequences following major Peruvian earthquakes can be extensive: the 2007 Pisco sequence continued for months, including an M6.0 event several weeks after the mainshock that caused additional building collapses. Lima's geology presents particular urban hazard concerns: the city is built on Quaternary river gravels and coastal sand deposits overlying much older basement, and the contrast in [[seismic-wave]] velocity between these units is expected to produce strong amplification during a future great earthquake. [[liquefaction]] of saturated coastal soils near Callao and Lima's port district is an additional concern documented in geotechnical studies. Peru's Geophysical Institute (IGP) operates the national seismological monitoring network.

हाल के भूकंप

तीव्रता स्थान समय
5.5 2 km WSW of Sicaya, Peru 1 day, 15 hours पहले

उल्लेखनीय ऐतिहासिक घटनाएं

Earthquakes Near Major Cities in Peru

अक्सर पूछे जाने वाले प्रश्न

Peru is located in a high seismic risk zone, meaning earthquakes are frequent and can be destructive. A total of 19 earthquakes have been recorded in Peru's seismic history.

The largest recorded earthquake in Peru had a magnitude of 6.0. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

Peru has had 19 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

Peru is classified in the "High" seismic zone, located in South America. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

भूकंप के दौरान, गिरो, ढको, और पकड़ो। एक मजबूत डेस्क या मेज़ के नीचे जाएँ, अपने सिर और गर्दन की रक्षा करें, और कंपन बंद होने तक पकड़े रहें। खिड़कियों और भारी वस्तुओं से दूर जाएँ। भूकंप के बाद, चोटों की जाँच करें और पश्चात्कंपों के लिए तैयार रहें।

देश के भूकंप जोखिम का आकलन कई कारकों का उपयोग करके किया जाता है: विवर्तनिक प्लेट सीमाओं से निकटता, ऐतिहासिक भूकंपीयता (पिछली घटनाओं की आवृत्ति और तीव्रता), भूवैज्ञानिक स्थितियाँ, भूकंपीय क्षेत्रों में जनसंख्या घनत्व, और भवन निर्माण संहिता प्रवर्तन। QuakeFYI इन कारकों के आधार पर 0 (कोई जोखिम नहीं) से 4 (बहुत अधिक) तक भूकंपीय क्षेत्र निर्धारित करता है।

भूकंपीय क्षेत्र एक भौगोलिक क्षेत्र है जिसे भूकंप खतरे के स्तर के अनुसार वर्गीकृत किया जाता है। क्षेत्र 0 में नगण्य जोखिम है, क्षेत्र 1 में कम जोखिम है, क्षेत्र 2 में मध्यम जोखिम है, क्षेत्र 3 में उच्च जोखिम है, और क्षेत्र 4 में बहुत अधिक जोखिम है। ये क्षेत्र ऐतिहासिक भूकंप डेटा, विवर्तनिक सेटिंग और भूवैज्ञानिक स्थितियों द्वारा निर्धारित किए जाते हैं।

प्रशांत रिंग ऑफ फायर के साथ स्थित देश सबसे अधिक भूकंपों का अनुभव करते हैं। जापान, इंडोनेशिया, चिली, फिलीपींस और ईरान लगातार सबसे अधिक भूकंपीय गतिविधि दर्ज करते हैं। संयुक्त राज्य अमेरिका (विशेषकर अलास्का और कैलिफोर्निया), तुर्किये और मेक्सिको भी सबसे अधिक भूकंपीय रूप से सक्रिय देशों में हैं।

जनसंख्या घनत्व भूकंप जोखिम को बढ़ाता है क्योंकि अधिक लोग और बुनियादी ढाँचा संभावित क्षति के संपर्क में होता है। घनी आबादी वाले शहर में 7.0 तीव्रता का भूकंप हजारों हताहत हो सकता है, जबकि निर्जन क्षेत्र में वही घटना कोई नुकसान नहीं कर सकती। भवन निर्माण संहिता और आपातकालीन तैयारी आबादी वाले क्षेत्रों में जोखिम को काफी कम करती है।

भूकंपीय घनत्व किसी देश के भूमि क्षेत्र के सापेक्ष भूकंप गतिविधि की सांद्रता को मापता है, जो प्रति 1,000 वर्ग किलोमीटर भूकंपों के रूप में व्यक्त किया जाता है। उच्च भूकंपीय घनत्व प्रति इकाई क्षेत्र में बार-बार भूकंप गतिविधि को इंगित करता है, जो विभिन्न आकार के देशों के बीच भूकंपीय जोखिम की तुलना करने में मदद करता है।

भूकंपीय मेट्रिक्स

भूकंपीय घनत्व
0.01
प्रति 1,000 km² भूकंप
भूकंपीय जोखिम
0.55
प्रति दस लाख लोगों पर भूकंप

विवर्तनिक प्लेटें

दोष रेखाएं

निकटवर्ती भूकंपीय गतिविधि

वार्षिक सारांश

भूकंप सुरक्षा

Peru उच्च भूकंपीय जोखिम क्षेत्र में है। भूकंपों के लिए तैयार रहने की दृढ़ता से अनुशंसा की जाती है।

  • कंपन के दौरान गिरो, ढको, और पकड़ो
  • पानी, भोजन और प्राथमिक चिकित्सा के साथ एक आपातकालीन आपूर्ति किट रखें
  • प्रत्येक कमरे में खिड़कियों और भारी वस्तुओं से दूर सुरक्षित स्थानों की पहचान करें
  • यदि तटीय क्षेत्र में हैं तो सुनामी निकासी मार्ग जानें