Ir para o conteúdo principal
🇳🇿

New Zealand

Zona Sísmica: Very High Oceania
Total de Terremotos
15
Maior Magnitude
5,3
Zona Sísmica
Very High

New Zealand está localizado em Oceania e tem uma classificação de risco sísmico Very High. Um total de 15 terremotos foram registrados na história sísmica do país. O maior terremoto registrado no país atingiu uma magnitude de 5,3. Com uma população de 5.324.700 e uma área de 268.838 km², eventos sísmicos podem ter implicações significativas para a infraestrutura e segurança pública.

Visão Geral Sísmica

New Zealand sits astride one of the most geologically active plate boundaries on Earth, where the Pacific Plate and the Australian Plate meet in a complex and geometrically varied collision. The boundary changes character dramatically along its length: in the South Island, the two plates collide obliquely, driving up the Southern Alps along the Alpine Fault at a rate of approximately 27 millimetres per year — one of the fastest onshore strike-slip faults in the world. The collision here is transpressional, combining right-lateral strike-slip with convergence, and has built the Southern Alps from sea level to peaks over 3,700 metres in geologically recent time. In the North Island, the subduction geometry reverses: the Pacific Plate dives westward beneath the Australian Plate along the Hikurangi [[subduction-zone]] off the east coast, generating both interface megathrust hazard and the active volcanic arc of the Taupo Volcanic Zone. The transition between these two fundamentally different plate boundary styles occurs beneath Marlborough at the northern end of the South Island, creating the densely faulted Marlborough Fault System — including the Hope, Wairau, and Clarence faults — one of the most seismically active onshore zones in the country. Wellington, the national capital, sits directly on the active Wellington Fault.

The seismic history of New Zealand is both long and well-documented, reflecting centuries of Maori oral tradition and European scientific observation. The 1848 Marlborough earthquake (magnitude 7.5) and 1855 Wairarapa earthquake (magnitude 8.2) severely affected the Wellington region, with the Wairarapa event causing 15 metres of horizontal displacement and 6 metres of vertical uplift — among the largest documented strike-slip offsets in recorded history. Hawke's Bay was devastated by the 1931 Napier earthquake (magnitude 7.8), which killed 256 people and destroyed virtually the entire city of Napier; subsequent drainage of Ahuriri Lagoon by earthquake uplift added 40 square kilometres to the land area of the city. The 1987 Edgecumbe earthquake (magnitude 6.5) ruptured the Edgecumbe Fault in the Bay of Plenty. The 2010 Darfield earthquake (magnitude 7.1) struck near Christchurch in September with no fatalities, largely because it struck in the early morning; its [[aftershock]] sequence, however, included the catastrophic 22 February 2011 Christchurch earthquake (magnitude 6.2), which killed 185 people and caused widespread [[liquefaction]] of suburban soils built on Holocene river gravels and sands. The February 2011 event, though smaller, caused far greater damage because its [[epicenter]] was shallower and closer to the city. The 2016 Kaikōura earthquake (magnitude 7.8) ruptured at least 21 fault segments simultaneously in a complex multi-fault event that caused widespread landslides, uplifted coastlines by up to several metres, and briefly dammed rivers before partial clearing.

The tectonic framework of New Zealand reflects approximately 25 million years of convergent boundary evolution along the Pacific-Australian boundary. The land area of New Zealand is merely the visible portion of Zealandia — an 80 percent submerged continental fragment that rifted from eastern Gondwana approximately 80 million years ago. Zealandia's basement rocks, exposed in the Fiordland, Otago, and Nelson regions, include Permian to Jurassic metamorphic and igneous terranes accreted to the Gondwana margin during the Mesozoic. The current plate boundary bisects this ancient continental fragment, with the eastern part of the South Island sitting on the Pacific Plate and the western South Island on the Australian Plate. The Hikurangi [[subduction-zone]] is partially locked along its length, with the northern portion accumulating elastic strain at depth while the southern portion near Wellington may be creeping aseismically on some segments. Scientific debate about the recurrence interval and maximum [[magnitude]] of a Hikurangi interface megathrust event — potentially magnitude 8.5 to 9.0 — is among the most important ongoing questions in New Zealand seismology. GNS Science's GeoNet network operates hundreds of seismometers, GPS receivers, and strong-motion sensors, and New Zealand operates a national [[early-warning]] research programme.

Terremotos Recentes

Mag Localização Hora
Nenhum terremoto recente.

Eventos Históricos Notáveis

Earthquakes Near Major Cities in New Zealand

Perguntas Frequentes

New Zealand is located in a very high seismic risk zone, meaning earthquakes are frequent and can be destructive. A total of 15 earthquakes have been recorded in New Zealand's seismic history.

The largest recorded earthquake in New Zealand had a magnitude of 5.3. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

New Zealand has had 15 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

New Zealand is classified in the "Very High" seismic zone, located in Oceania. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

Durante um terremoto, Abaixe, Proteja-se e Aguarde. Fique sob uma mesa resistente, proteja cabeça e pescoço e aguarde até o tremor parar. Afaste-se de janelas e objetos pesados. Após o terremoto, verifique se há feridos e esteja preparado para réplicas.

O risco sísmico de um país é avaliado usando vários fatores: proximidade aos limites das placas tectônicas, sismicidade histórica (frequência e magnitude de eventos passados), condições geológicas, densidade populacional em zonas sísmicas e aplicação dos códigos de construção. O QuakeFYI atribui zonas sísmicas de 0 (sem risco) a 4 (muito alto) com base nesses fatores.

Uma zona sísmica é uma área geográfica classificada pelo nível de perigo de terremoto. A Zona 0 tem risco negligenciável, a Zona 1 tem risco baixo, a Zona 2 tem risco moderado, a Zona 3 tem risco alto e a Zona 4 tem risco muito alto. Essas zonas são determinadas por dados históricos de terremotos, contexto tectônico e condições geológicas.

Os países ao longo do Anel de Fogo do Pacífico experimentam a maioria dos terremotos. Japão, Indonésia, Chile, Filipinas e Irã registram consistentemente a maior atividade sísmica. Os Estados Unidos (especialmente Alasca e Califórnia), Turquia e México também estão entre as nações mais sismicamente ativas.

A densidade populacional amplifica o risco sísmico porque mais pessoas e infraestrutura estão expostas a danos potenciais. Um terremoto de magnitude 7,0 em uma cidade densamente povoada pode causar milhares de vítimas, enquanto o mesmo evento em uma área desabitada pode não causar nenhuma. Códigos de construção e preparação para emergências reduzem significativamente o risco em áreas povoadas.

A densidade sísmica mede a concentração de atividade de terremotos em relação à área terrestre de um país, expressa em terremotos por 1.000 quilômetros quadrados. Uma alta densidade sísmica indica atividade frequente de terremotos por unidade de área, ajudando a comparar o risco sísmico entre países de diferentes tamanhos.

Métricas Sísmicas

Densidade Sísmica
0,06
terremotos por 1.000 km²
Exposição Sísmica
2,82
terremotos por milhão de pessoas

Placas Tectônicas

Falhas Geológicas

Atividade Sísmica Próxima

Resumo Anual

Segurança contra Terremotos

New Zealand está em uma zona de risco sísmico muito alto. A preparação para terremotos é essencial para residentes e viajantes.

  • Abaixe, Proteja-se e Aguarde durante o tremor
  • Mantenha um kit de emergência com água, alimentos e primeiros socorros
  • Identifique locais seguros em cada cômodo, longe de janelas e objetos pesados
  • Conheça as rotas de evacuação de tsunami se estiver em área costeira