Ir para o conteúdo principal
QuakeFYI

Distance from Epicenter

Calculate your distance from an earthquake epicenter and check if you would have felt the shaking.

Calculation

Epicentro

Sua Localização

Parâmetros do Terremoto

Como a Distância do Epicentro Afeta a Vibração

O epicentro é o ponto na superfície da Terra diretamente acima do foco (hipocentro) do terremoto, onde a ruptura da falha se origina. Ondas sísmicas se propagam a partir do hipocentro em todas as direções, e sua amplitude diminui com a distância devido à dispersão geométrica e atenuação — a absorção de energia pela rocha e solo. É por isso que a intensidade da vibração diminui à medida que você se afasta do epicentro, embora a taxa de diminuição dependa da geologia local, profundidade do terremoto e tipo de onda.

O raio de percepção — a distância máxima na qual as pessoas podem perceber um terremoto — depende principalmente da magnitude e profundidade. Um terremoto raso M6,0 pode ser sentido a 200-400 km de distância, enquanto um evento profundo M6,0 a 300 km de profundidade pode ter um raio de percepção menor apesar da mesma magnitude. Terremotos rasos concentram energia perto da superfície, produzindo vibração mais forte, mas mais localizada, enquanto terremotos profundos distribuem energia em uma área mais ampla, porém menos intensa.

Conceitos-chave

  • A fórmula de Haversine calcula a distância do grande círculo entre dois pontos em uma esfera, que é o método usado para determinar a distância epicentral.
  • Tipos de ondas sísmicas — Ondas P (primárias, compressivas) chegam primeiro e viajam mais rápido; ondas S (secundárias, de cisalhamento) chegam em seguida e causam mais danos; ondas de superfície (Love e Rayleigh) chegam por último, mas carregam a energia mais destrutiva.
  • Modelos de atenuação de intensidade (como os do USGS ShakeMap) preveem como a Intensidade Mercalli Modificada diminui com a distância para uma dada magnitude e profundidade.
  • A amplificação local pode fazer com que locais distantes sobre solo mole experimentem vibração mais forte do que locais mais próximos sobre rocha.

Usos Comuns

  • Determinar rapidamente se sua localização está dentro da área de percepção de um terremoto reportado.
  • Estimar a intensidade da vibração a uma distância específica para cenários de planejamento de emergência.
  • Entender como profundidade e magnitude interagem para produzir diferentes padrões de vibração.

How to Use

  1. 1
    Set the Epicenter Coordinates

    Enter the earthquake epicenter latitude and longitude, or search by a recent event name. Epicenter coordinates are published by USGS, EMSC, and national seismological agencies within minutes of a significant event.

  2. 2
    Enter Your Location

    Provide your current location as coordinates, a city name, or an address. The tool calculates the great-circle (surface) distance using the Haversine formula.

  3. 3
    Interpret Your Shaking Estimate

    Review your estimated Modified Mercalli Intensity (MMI) and whether the shaking would likely be felt. The estimate uses USGS ShakeMap attenuation relations and assumes average soil conditions.

About

The relationship between distance and ground shaking follows well-defined attenuation functions central to seismic hazard analysis. As seismic waves travel outward from the hypocenter, their amplitude decreases due to geometric spreading (energy distributed over an ever-larger spherical surface) and anelastic attenuation (energy absorbed as heat by imperfectly elastic rock). These effects are codified in Ground Motion Prediction Equations (GMPEs), empirical models derived from thousands of recorded earthquakes that predict median and standard deviation of ground motion parameters—such as peak ground acceleration (PGA) or spectral acceleration—as functions of magnitude, distance, depth, and site class.

ShakeMap, developed by the USGS and now adopted by agencies worldwide, combines recorded ground motions from seismograph networks with GMPE predictions to produce near-real-time maps of shaking intensity across a region. The maps use the Modified Mercalli Intensity (MMI) scale, where MMI I–II represents not-felt or barely-felt shaking, MMI V causes objects to fall from shelves, MMI VII–VIII damages poorly constructed buildings, and MMI X–XII represents near-total structural destruction. ShakeMaps are generated within minutes of significant earthquakes and are used immediately by emergency managers for resource deployment decisions.

For coastal regions, distance from a submarine epicenter carries additional significance beyond ground shaking: earthquake-generated tsunamis. Tsunamis are most efficiently generated by thrust earthquakes on shallow-dipping (< 30°) submarine faults with vertical displacement components greater than roughly 1 meter. The 2004 Sumatra tsunami was triggered 250 km offshore Aceh; wave heights at the coast reached 30 m. Coastal residents within 100 km of a subduction zone should be familiar with the Drop-Cover-Hold guidance for shaking, followed by immediate vertical or inland evacuation upon feeling prolonged shaking lasting more than 20 seconds.

FAQ

How is distance from an earthquake epicenter measured?
Seismologists distinguish between epicentral distance (the surface distance from a location to the point directly above the focus) and hypocentral distance (the straight-line distance to the actual rupture source, accounting for depth). For shallow earthquakes (< 20 km depth), the two values are nearly identical at distances greater than a few kilometers. Epicentral distance is measured along the Earth's surface as the great-circle arc between two points and is expressed in degrees (1° ≈ 111 km) in seismological contexts, or in kilometers for engineering applications. Hypocentral distance is the appropriate quantity for attenuation relations used to predict ground motion.
How far away can an earthquake be felt?
Felt distance depends primarily on magnitude, depth, and regional geology. As a rough guide: a M4.0 may be felt up to 100 km away; a M6.0 up to 400–500 km; a M8.0 can be felt across continental scales exceeding 1,500 km. Deep earthquakes (> 300 km) can be felt at exceptional distances because their waves travel through the mantle with lower attenuation than crustal paths. The 2013 Okhotsk Sea M8.3 deep earthquake (610 km depth) was felt across Russia and as far as Moscow (6,000+ km). Geological structure also plays a role: the central US has lower attenuation than the western US, meaning eastern earthquakes historically felt over larger areas than western events of similar magnitude.
What is the difference between epicenter and hypocenter?
The hypocenter (also called the focus) is the actual point within the Earth where the rupture initiates—where elastic strain energy is first released along the fault. The epicenter is the geographic point on the Earth's surface directly above the hypocenter, obtained by projecting vertically upward. USGS and other agencies report both: epicenter coordinates (latitude/longitude) and focal depth. Depth matters greatly for hazard: a M6.5 earthquake at 5 km depth can be highly destructive, while the same magnitude at 600 km depth may be barely felt at the surface. The 2001 Bhuj earthquake (India) had a shallow depth of 23 km and caused catastrophic damage; in contrast, deep subduction events in the Tonga trench at 600+ km rarely cause surface damage.
Does earthquake depth affect felt shaking?
Earthquake depth has a major influence on the distribution and character of felt shaking. Shallow earthquakes (< 20 km, called 'crustal' earthquakes) concentrate energy near the surface and produce intense, short-duration shaking in a relatively small area. As depth increases, the energy radiates over a larger spherical surface, reducing peak intensities but spreading felt shaking over broader regions. Intermediate-depth earthquakes (70–300 km) in subducting slabs can shake large areas at lower intensities. Very deep earthquakes (> 300 km, 'deep focus') are felt across enormous distances but rarely cause significant damage. The 1994 Northridge M6.7 at 19 km depth caused 57 deaths and US$20 billion in damage; its shallow depth was a key factor in the severity.
Can I determine my distance from an earthquake using a seismograph?
Yes—this is the classical method of locating earthquakes. Seismographs record P-waves (compressional, faster, ~6 km/s in the crust) and S-waves (shear, slower, ~3.5 km/s). The time interval between the P-wave and S-wave arrivals, called the S-P time or Wadati plot, is directly proportional to the distance: distance ≈ S-P time × Vp × Vs / (Vp − Vs). A simple rule of thumb: for every 8 seconds of S-P interval, the earthquake is approximately 80 km away. Three or more seismograph stations allow triangulation of the epicenter. Modern seismic networks with hundreds of stations achieve epicenter location accuracies of 1–5 km within seconds of a significant event.