United Arab Emirates
United Arab Emirates تقع في Asia ولها تصنيف مخاطر زلزالية Low. تم تسجيل ما مجموعه 5 زلزالاً في التاريخ الزلزالي للبلد. بلغت قوة أكبر زلزال مسجّل في البلاد 4,6. مع عدد سكان يبلغ 11294243 ومساحة أرض 83600 كم²، يمكن أن يكون للأحداث الزلزالية آثار كبيرة على البنية التحتية والسلامة العامة.
نظرة عامة زلزالية
The United Arab Emirates occupies the southeastern corner of the Arabian Peninsula, bordered by the Persian Gulf to the west and the Gulf of Oman and Hajar Mountains to the northeast. Like most of the Arabian Peninsula interior, the UAE sits on the stable Arabian Platform — an ancient craton that has not been deformed by active plate collision for hundreds of millions of years. The principal seismic hazard in the UAE comes not from local faults but from distant sources: the Makran [[subduction-zone]] to the northeast in Pakistan and Iran, which is capable of generating magnitude 8+ earthquakes and associated [[tsunami]]s, and from the Zagros fold belt in Iran across the Gulf.
The UAE's earthquake record shows that the country has experienced only minor local seismicity. The Hajar Mountains in the northeast Emirate of Fujairah and Ras Al Khaimah represent an obducted ophiolite complex from the Tethys Ocean, similar to Oman's Semail Ophiolite, and some residual fault activity remains along its margins. The 2002 Gulf of Oman earthquake (magnitude 5.6) caused minor felt effects in the UAE. The construction of high-rise buildings in Dubai and Abu Dhabi has raised awareness of long-period [[seismic-wave]] amplification effects from distant Zagros earthquakes. The 2013 Gulf earthquake sequence caused building evacuations in Dubai. The most significant seismic planning concern for the UAE is the Makran subduction zone — the 1945 Makran earthquake generated tsunami waves that reportedly reached Muscat, and similar waves could strike UAE coastlines with limited warning time.
The geological foundation of the UAE consists of Tertiary limestone, sandstone, and evaporite sequences underlain by the thick sedimentary cover of the Arabian Platform. Sand dunes and sabkha (salt flat) deposits cover much of the desert interior. The gentle anticlines that trap the UAE's oil and gas reserves are ancient structural features unrelated to active tectonics. Building codes in the UAE have progressively incorporated seismic design requirements in recognition of the Makran [[subduction-zone]] hazard, and tsunami evacuation planning for the eastern (Gulf of Oman) coast has been developed in coordination with Oman and Pakistan. The primary focus of seismic risk management in the UAE is thus the indirect hazard from distant megathrust events rather than the direct hazard from local fault rupture.
الزلازل الأخيرة
| القوة | الموقع | الوقت |
|---|---|---|
| 4,2 | 60 km NE of Bandar Abbas, Iran | 2 أسبوعين، 3 أيام مضت |
Earthquakes Near Major Cities in United Arab Emirates
الأسئلة الشائعة
United Arab Emirates has a low level of seismic activity. Large earthquakes are infrequent but not impossible. A total of 5 earthquakes have been recorded in United Arab Emirates's seismic history.
The largest recorded earthquake in United Arab Emirates had a magnitude of 4.6. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.
United Arab Emirates has had 5 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.
United Arab Emirates is classified in the "Low" seismic zone, located in Asia. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.
أثناء الزلزال، انبطح واحتمِ وتمسّك. اذهب تحت مكتب أو طاولة متينة، واحمِ رأسك ورقبتك، وتمسّك حتى يتوقف الاهتزاز. ابتعد عن النوافذ والأجسام الثقيلة. بعد الزلزال، تحقق من الإصابات وكن مستعداً للهزات الارتدادية.
تُقيَّم مخاطر الزلازل في أي دولة باستخدام عدة عوامل: القرب من حدود الصفائح التكتونية، والنشاط الزلزالي التاريخي (تواتر وقوة الأحداث السابقة)، والظروف الجيولوجية، والكثافة السكانية في المناطق الزلزالية، وتطبيق قوانين البناء. يصنّف QuakeFYI المناطق الزلزالية من 0 (لا خطر) إلى 4 (خطر مرتفع جداً) بناءً على هذه العوامل.
المنطقة الزلزالية هي منطقة جغرافية مصنّفة حسب مستوى خطر الزلازل. المنطقة 0 ذات خطر ضئيل، والمنطقة 1 ذات خطر منخفض، والمنطقة 2 ذات خطر متوسط، والمنطقة 3 ذات خطر مرتفع، والمنطقة 4 ذات خطر مرتفع جداً. تُحدَّد هذه المناطق بناءً على بيانات الزلازل التاريخية والبيئة التكتونية والظروف الجيولوجية.
تشهد الدول الواقعة على حلقة النار في المحيط الهادئ أكثر الزلازل. تسجّل اليابان وإندونيسيا وتشيلي والفلبين وإيران باستمرار أعلى نشاط زلزالي. كما تُعدّ الولايات المتحدة (خاصة ألاسكا وكاليفورنيا) وتركيا والمكسيك من بين أكثر الدول نشاطاً زلزالياً.
تضخّم الكثافة السكانية مخاطر الزلازل لأن المزيد من الناس والبنية التحتية يتعرضون لأضرار محتملة. يمكن أن يتسبب زلزال بقوة 7.0 في مدينة مكتظة بآلاف الضحايا، بينما قد لا يتسبب نفس الحدث في منطقة غير مأهولة بأي ضحايا. تقلل قوانين البناء والاستعداد للطوارئ المخاطر بشكل كبير في المناطق المأهولة.
تقيس الكثافة الزلزالية تركّز النشاط الزلزالي بالنسبة لمساحة أراضي الدولة، ويُعبَّر عنها بعدد الزلازل لكل 1,000 كيلومتر مربع. تشير الكثافة الزلزالية العالية إلى نشاط زلزالي متكرر لكل وحدة مساحة، مما يساعد في مقارنة المخاطر الزلزالية بين دول مختلفة الأحجام.