Skip to main content
🇨🇴

Colombia

Seismic Zone: High South America
Total Earthquakes
8
Largest Magnitude
4.9
Seismic Zone
High

Colombia is located in South America and has a High seismic risk classification. A total of 8 earthquakes have been recorded in the country's seismic history. The largest earthquake recorded in the country reached a magnitude of 4.9. With a population of 53,057,212 and a land area of 1,141,748 km², seismic events can have significant implications for infrastructure and public safety.

Seismic Overview

Colombia occupies one of the most seismically complex corners of South America, sitting at the junction where the Nazca Plate, Caribbean Plate, and South American Plate all converge within its territory. The Pacific coast faces the ongoing subduction of the Nazca Plate beneath the South American Plate along the Colombia-Ecuador Trench — a source of large interplate earthquakes and [[tsunami]] hazard for the Pacific lowlands. Along the Caribbean coast and offshore, the Caribbean Plate moves eastward relative to South American along a poorly constrained boundary of oblique convergence that generates seismicity in northern Colombia and the Venezuelan borderlands. The Andes — which in Colombia split into three parallel cordilleras — host numerous active volcanoes and intracordilleran thrust faults that generate destructive crustal earthquakes under and near major cities. Bogotá, Medellín, Cali, and Manizales all sit in seismically active highland zones. The Romeral Fault System, running the length of the central Cordillera, is a major active structure dividing the Pacific margin accreted terranes from the older South American continental crust and is one of the country's principal seismic sources. The complex geometry of multiple converging plates, active volcanism, and densely populated mountain terrain creates a seismic risk profile that spans virtually the entire country.

Colombia's earthquake history includes multiple catastrophic events in its urban highland zones. The 25 January 1999 Armenia earthquake (magnitude 6.1) struck the coffee-growing Quindío department, killing 1,185 people, injuring over 5,000, and destroying more than 60 percent of buildings in Armenia and surrounding towns; the relatively modest [[magnitude]] caused enormous losses because of shallow depth (close [[epicenter]] to population centres) and the poor seismic resistance of typical construction in the region. The 12 December 1979 Tumaco earthquake (magnitude 7.9) generated a [[tsunami]] that struck the Pacific coast, killing approximately 259 people in coastal communities. The 9 February 1967 Huila earthquake (magnitude 6.8) killed 98 people. The 31 January 1906 Ecuador-Colombia earthquake (magnitude 8.5–8.8) is one of the largest earthquakes ever recorded and generated a [[tsunami]] that killed over 1,000 people along the Colombia-Ecuador Pacific coast; its rupture zone extended from southern Colombia through Ecuador. The Cauca-Patía Valley and the coffee-growing regions of the central Andes have been struck repeatedly by significant earthquakes in the historical record, including events in 1962, 1962, 1983, and the 1999 Armenia disaster. The volcanic chain includes active or recently active volcanoes including Nevado del Ruiz, Galeras, and Nevado del Huila, which generate volcano-tectonic earthquake swarms and represent additional hazards.

Colombia's tectonic setting reflects the progressive accretion of oceanic terranes — including oceanic plateau material derived from the Caribbean Large Igneous Province — onto the northwestern margin of the South American continent during the Late Cretaceous and Paleogene. The western Cordillera and the coastal ranges are built on this accreted oceanic material; the central and eastern Cordillera expose older Precambrian and Paleozoic South American continental basement, deformed and uplifted by Andean shortening. The segmented nature of the Andes in Colombia, with three distinct ranges separated by deep intermontane valleys, reflects the geometry of the crustal collision and thrust belt architecture. The Romeral Fault System marks the boundary between accreted Pacific terranes to the west and the South American craton to the east and has generated multiple historical destructive earthquakes. [[aftershock]] sequences in Colombia's highlands can be prolonged and damaging given the vulnerability of existing construction; the 1999 Armenia sequence included M5+ events for several weeks. Colombia's National Seismological Network (RSNC), operated by the SGC (Colombian Geological Survey), provides real-time monitoring and participates in regional [[tsunami]] warning systems for the Pacific coast.

Recent Earthquakes

Mag Location Time
4.6 3 km NE of Jordán, Colombia 18 hours, 46 minutes ago

Notable Historical Events

Earthquakes Near Major Cities in Colombia

Frequently Asked Questions

Colombia is located in a high seismic risk zone, meaning earthquakes are frequent and can be destructive. A total of 8 earthquakes have been recorded in Colombia's seismic history.

The largest recorded earthquake in Colombia had a magnitude of 4.9. Earthquakes of this size can cause significant damage depending on depth, location, and local building standards.

Colombia has had 8 recorded earthquakes. This count includes events of all magnitudes detected by seismic monitoring networks. The actual number of earthquakes may be higher, as smaller events can go undetected.

Colombia is classified in the "High" seismic zone, located in South America. Seismic zones indicate the relative level of earthquake hazard based on historical activity, geological conditions, and proximity to tectonic plate boundaries.

During an earthquake, Drop, Cover, and Hold On. Get under a sturdy desk or table, protect your head and neck, and hold on until shaking stops. Move away from windows and heavy objects. After the earthquake, check for injuries and be prepared for aftershocks.

Country earthquake risk is assessed using several factors: proximity to tectonic plate boundaries, historical seismicity (frequency and magnitude of past events), geological conditions, population density in seismic zones, and building code enforcement. QuakeFYI assigns seismic zones from 0 (no risk) to 4 (very high) based on these factors.

A seismic zone is a geographic area classified by the level of earthquake hazard. Zone 0 has negligible risk, Zone 1 has low risk, Zone 2 has moderate risk, Zone 3 has high risk, and Zone 4 has very high risk. These zones are determined by historical earthquake data, tectonic setting, and geological conditions.

Countries along the Pacific Ring of Fire experience the most earthquakes. Japan, Indonesia, Chile, the Philippines, and Iran consistently record the highest seismic activity. The United States (especially Alaska and California), Turkey, and Mexico are also among the most seismically active nations.

Population density amplifies earthquake risk because more people and infrastructure are exposed to potential damage. A magnitude 7.0 earthquake in a densely populated city can cause thousands of casualties, while the same event in an uninhabited area may cause none. Building codes and emergency preparedness greatly reduce risk in populated areas.

Seismic density measures the concentration of earthquake activity relative to a country's land area, expressed as earthquakes per 1,000 square kilometers. A high seismic density indicates frequent earthquake activity per unit area, helping compare seismic risk between countries of different sizes.

Seismic Metrics

Seismic Density
0.01
quakes per 1,000 km2
Seismic Exposure
0.15
quakes per million people

Tectonic Plates

Fault Lines

Nearby Seismic Activity

Yearly Summary

Earthquake Safety

Colombia is in a high seismic risk zone. Being prepared for earthquakes is strongly recommended.

  • Drop, Cover, and Hold On during shaking
  • Keep an emergency supply kit with water, food, and first aid
  • Identify safe spots in each room away from windows and heavy objects
  • Know tsunami evacuation routes if in a coastal area